Investigation of a DNA Profiling Method Using Only Cementum More Than 70 Years After Death.

Short tandem repeat (STR) typing is widely used not only for blood relationship identification but also for the personal identification of unidentified bodies. However, DNA is susceptible to the effects of environmental factors, consequently leading to reduced DNA yields. Therefore, to maximize the DNA yield required for identification, teeth are generally completely pulverized during DNA extraction. However, this renders subsequent testing after DNA profiling impossible. In this study, we investigated the utility of DNA profiling using only the cementum from teeth that had been left outdoors for long postmortem intervals. We analyzed 90 molars (fresh teeth) that were extracted within six months at a dental clinic and 90 molars (stale teeth) exposed outdoors for over 70 years, and following cementum extraction, the accuracy of STR profiling, optimal site for cementum collection, and minimum amount of cementum required for STR profiling were determined. The results demonstrated that the profiling accuracy of DNA extracted from cementum was comparable to that of DNA from dental pulp and dentin. Furthermore, the collection of cementum from either near the cervical line or from the root apex areas did not show significant differences in DNA profiling accuracy, indicating that securing at least 5 mg of cementum was sufficient to ensure precise DNA profiling. These findings suggest that DNA profiling using only cementum is viable even in teeth that have been subjected to a long postmortem interval.

Influence of the amount of saliva deposition and time elapsed after deposition on bite mark analysis.

Bite mark analysis is among the most interesting research fields in forensic odontology; however, it is limited by its dependence on the employed method as well as assessor subjectivity, particularly when using morphological analysis or DNA profiling. These limitations are due to differences in DNA collected from saliva adhering to a living or inanimate body, as well as differences in exocrine fluid secretion and deposition amount among individuals. This study aimed to analyze the effectiveness of DNA profiling when there are differences in the amount of saliva adhering to a living body and when time has elapsed since deposition. Most allele peaks could be identified in 1 µl of saliva, even 9 h after saliva deposition and examination. Consistent results were obtained following saliva deposition in an individual who had engaged in up to 9 h of free activity. The results of this study demonstrate the validity and reliability of DNA profiling for bite mark analysis and are extremely important as they can demonstrate the usefulness of the little information left by a suspect on a victim's body.

A method for estimating time since death through analysis of substances deposited on the surface of dental enamel in a body immersed in freshwater.

Estimating the elapsed time after death of a corpse immersed in freshwater is often challenging owing to body temperature changes and the degree of postmortem lividity, and the tissues used for this assessment deteriorate drastically as the postmortem period progresses. In this study, assuming a corpse was immersed in freshwater, we analyzed changes in the amount of deposits on the enamel surface of teeth since the time of immersion using an electron probe microanalyzer. We calculated a regression equation for estimating the time of immersion in water (the time after death). We considered this approach would be useful to estimate the time after death even in rotting and skeletonized corpses from which only limited information could be obtained. This study was undertaken according to a previously reported method that used a regression equation for estimating the time after death of bodies found in a seawater area.

New Method of Dental Personal Identification of Disaster Victims Using Oral Scanner.

Dentistry plays an important role in the identification of victims in large-scale disasters. The current poor status of and problems with victim identification work were highlighted in the aftermath of the Great East Japan Earthquake of March 11, 2011, in which some 10,000 people lost their lives. The techniques of dental identification therefore need to be improved if they are to cope with the problems associated with identification that will accompany the predicted Tokai earthquake and other unexpected large-scale disasters in the future. The purpose of this study was to determine the effectiveness of applying a digital impression-taking device employed in regular dental care to dental personal identification. The Trophy 3DI pro (Yoshida Dental) was applied to a total of 150 dental models. The diagnosis was accurate in 2,096 teeth from a sample of 2,100 comprising 1,240 non-treated teeth, 670 treated teeth, and 190 missing teeth, yielding a 99.8% level of statistical precision. These results suggest that the level of accuracy offered by this impression-taking device indicates that it would be a useful tool in establishing personal identification in disaster victims.

Personal Identification by Superimposition of Three-dimensional Intraoral Models.

Victim identification following disasters is an important task for the dentist. Use of records of previous dental treatment proved effective in victim identification after the crash of Japan Airlines Flight 123 in 1985. This dental identification procedure can be problematic, however. In exceptional cases, the victim may have had very little or no prior treatment, making identification by this means impossible. The purpose of this study was to establish a new method of dental identification based on morphological comparison of the oral cavity, rather than on evidence of prior dental treatment. This new method involves superimposing 3-dimensional (3-D) models created by digital impression-taking devices, use of which is becoming increasingly widespread in present-day dental treatment. A total of 75 dental models were used to obtain 3-D models. These were then used in a total of 77 superimposition tests. The results demonstrated that the degree of similarity was 98.03－41.30%, and the degree of difference 0.17－29.69%. This indicated that differences among the dental models could be identified with 100% precision. Personal identification by superimposition of such 3-D models offers a useful tool that could compensate for the shortcomings of standard dental identification.

Comparison of Characteristics of Dental Malpractice Trials between Medical Malpractice and Ordinary Divisions in District Courts.

The purpose of this study was to elucidate the characteristics of dental malpractice trials undertaken by medical malpractice divisions and ordinary divisions in district courts. Dentistry disputes in a total of 84 trials held between 1977 and 2014 were investigated. A total of 45 were conducted by medical malpractice divisions, resulting in 18 approvals and 27 dismissals, while 39 were undertaken by ordinary divisions, leading to 24 approvals and 15 dismissals. The parameters analyzed comprised category of dental treatment, judgment, amount claimed, and amount accepted. The results revealed that the mean amount claimed in trials held by medical malpractice divisions (¥12,563,324) was lower than that sought in trials conducted by ordinary divisions. The amount accepted was also found to exceed 50% of the amount claimed in 6 trials held by ordinary divisions (maximum 75.2%), but in only 2 trials conducted by medical malpractice divisions (maximum 54.8%); the mean amount accepted in trials held by medical malpractice divisions was 24.2%. These results indicate that judgments in trials conducted by medical malpractice divisions place a stronger emphasis on resolution of dental malpractice dispute than on pursuing truth or carrying out proper legal procedures.

Population Genetics in Malaysia and Japanese Populations Using Power Plex Y23 System.

Population flow between Southeast Asian countries and Japan continues to gather pace. Accordingly, the number of foreigners involved in incidents in Japan has markedly increased, which means that forensic dentistry is now increasingly being faced with the need to analyze DNA from persons of non-Japanese extraction. The DNA test currently used for personal identification mainly utilizes short tandem repeats (STRs) on autosomal chromosomes and the Y-chromosome. This test was developed for use in personal identification, not for distinguishing among races; nonetheless, the standard method for personal identification is often used because the procedure has been established. To determine the degree to which racial differences can be distinguished by standard DNA analysis, 23 STRs located on the Y chromosome were investigated in 218 Malay and 426 Japanese males. The frequencies of each STR were calculated in the two populations. The difference in the power of discrimination between the Malay and Japanese populations ranged from a minimum of 0.01 to a maximum of 0.27; the difference in polymorphic information content ranged from 0.01 (minimum) to 0.23 (maximum). No major differences were noted in the polymorphisms in these two Mongoloid populations, but the distributions of the 17 STRs differed significantly. Short tandem repeat types demonstrating a likelihood of racial differences were identified in 14 of the STRs. Race-specific STR types were identified in 10 STRs. These results suggest that the likelihood of Malay or Japanese genetic background can be judged based on Y-chromosome STR test results.

Trial application of oxygen and carbon isotope analysis in tooth enamel for identification of past-war victims for discriminating between Japanese and US soldiers.

Stable isotope analysis has undergone rapid development in recent years and yielded significant results in the field of forensic sciences. In particular, carbon and oxygen isotopic ratios in tooth enamel obtained from human remains can provide useful information for the crosschecking of morphological and DNA analyses and facilitate rapid on-site prescreening for the identification of remains. This study analyzes carbon and oxygen isotopic ratios in the tooth enamel of Japanese people born between 1878 and 1930, in order to obtain data for methodological differentiation of Japanese and American remains from the Second World War. The carbon and oxygen isotopic ratios in the tooth enamel of the examined Japanese individuals are compared to previously reported data for American individuals (born post WWII), and statistical analysis is conducted using a discrimination method based on a logistic regression analysis. The discrimination between the Japanese and US populations, including Alaska and Hawaii, is found to be highly accurate. Thus, the present method has potential as a discrimination technique for both populations for use in the examination of mixed remains comprising Japanese and American fallen soldiers.

Evaluation of the palatal bone for placement of orthodontic mini-implants in Japanese adults.

Mini-implants are increasingly being used for orthodontic anchorage in the palate. The anatomical structure of the jaw must be properly evaluated prior to use; however, there are a few research reports providing basic data regarding the palate. Bone thickness was measured and bone morphology evaluated in the palates of Japanese people. The palates of five Japanese adult cadavers and 15 skulls were examined. The samples were imaged and measured using the micro-CT system. In the mid-palatine suture region, the cortical bone had a complex mesh-like structure and was thicker than surrounding areas. Cortical bone thickness varied depending on the site. The mid-palatine suture region is an ideal site for mini-implant insertion; however, because bone and cortical bone thickness markedly decrease in the lateral region, careful attention should be paid when inserting mini-implants in the mid-palatine suture.

Three-dimensional observation of decrease in pulp cavity volume using micro-CT: age-related change.

We investigated three-dimensional decrease in the volume of the pulp chamber caused by age-related secondary dentin formation using micro-CT and evaluated the applicability of the results to evaluation of age taking into account sex, age and tooth type. Decrease was slightly higher in females than in males, and a higher correlation between decrease and aging was observed in females. A comparison between age-groups revealed that decrease progressed between the fifties and sixties in males, and the forties and fifties in females. A stronger correlation between aging and decrease was observed in the mandibular central incisors than in the mandibular second premolars. This correlation was higher than other correlations between sexes and age-groups.

Morphologic characteristics of the superior pharyngeal constrictor muscle in relation to the function during swallowing.

To clarify the morphologic characteristics of the superior pharyngeal constrictor muscle, which plays an important role in swallowing, the gross anatomy of the pterygopharyngeal, buccopharyngeal, mylopharyngeal, and glossopharyngeal parts of the muscle was examined. Morphology of the origin of the muscle at the buccopharyngeal part could be divided into three types: type A, membranous morphology from superior to inferior areas; type B, membranous only in superior area; and type C, complete lack of membrane. In all three types, the muscle at the buccopharyngeal part transitionally originated from the buccinator muscle. Morphology of the origin of the muscle at the mylopharyngeal part could be divided into two types: type A, tip of the origin on the mylohyoid line; and type B, tip of the origin away from the mylohyoid line. The present study found that the superior pharyngeal constrictor muscle is attached to the buccinator muscle (which plays an important role in mastication) with mucosa and originates from the mandible and root of the tongue. These findings suggest that the superior pharyngeal constrictor muscle may also play an important role in the expression of smooth coordinated movements associated with ingestion, from mastication to swallowing.

Anatomical study of accessory nerve innervation relating to functional neck dissection.

PURPOSE: The present study sought to clarify correlations of accessory nerve innervation in the neck region and innervation of the sternocleidomastoid and trapezius muscles with postoperative dysfunction after functional neck dissection by macroscopic observation. MATERIALS AND METHODS: The materials used in this study were 35 cadavers provided for anatomical practice to the Department of Anatomy, Tokyo Dental College. The accessory nerve was identified at the anterior margin of the trapezius muscle, and its innervation in the posterior triangle of the neck was examined in detail. RESULTS: The superficial cervical vein vascularizes the anterior margin of the trapezius muscle near an area where the main trunk of the accessory nerve innervates the trapezius muscle. The results showed 3 types of accessory nerve innervation of the sternocleidomastoid muscle: Type A, the not penetrating type; Type B, the partially penetrating type; and Type C, the completely penetrating type. In addition, 5 types of innervation of the trapezius muscle by the main trunk and branches of the accessory nerve were apparent, with the number of branches innervating the muscle ranging from 0 to 4. CONCLUSIONS: Dysfunction after functional neck dissection can thus be avoided by paying attention to not only the main trunk of the accessory nerve, but also the branches. Moreover, when identifying accessory nerve innervation of the trapezius muscle, the superficial cervical vein may offer a useful surgical landmark.

Changes in muscle-fiber properties of the murine digastric muscle before and after weaning.

The digastric muscle is one of the suprahyoid muscles and consists of the anterior and posterior bellies. Because muscle fiber alignments in these two bellies are different, the functional roles are said to be different. Since the digastric muscle relates to mastication, its functions may change markedly before and after weaning, but many details remain unknown. The aim of this study was to clarify changes in muscle fiber properties of the anterior and posterior bellies of the digastric muscle in mice before and after weaning. Expressions of myosin heavy chain (MyHC) isoforms were assessed at the protein and transcriptional levels. Expression of the MyHC-2b isoform, an isoform displaying fast, strong contraction, was greater in the anterior belly than in the posterior belly after weaning. This suggests that, in mice, the anterior belly of the digastric muscle needs to move rapidly anteroposteriorly for mastication, compared with the posterior belly.

Experimental device for detecting laryngeal movement during swallowing.

It has been reported that swallowing is a rhythmic movement, in which the onset of the oro-pharyngeal stage of swallowing starts from the mylohyoid muscle, followed by movement of the oral and pharyngeal muscles, and reaching the superior esophageal sphincter muscle. This is defined as the oro-pharyngeal stage of swallowing. It has also been reported that along with this movement, the larynx elevates in an antero-superior direction. To investigate the swallowing movement, it would be useful to be able to detect the start of swallowing movements from the body surface. Such a device was designed in this study to investigate the relationships between the onset of laryngeal movement and the EMG initiation of the anterior digastric muscle. Although experimental conditions must be further examined, we were able to record the reproducible movement and the position of larynx using our device provides another tool for studying the swallowing movement.

Muscle-fiber characteristics in adult mouse-tongue muscles.

To clarify functions of the mouse-tongue muscles, proteins such as myocin heavy chain (MHC) 2a and MHC-2b, which are isoforms of the fast-twitch fiber type myosin heavy chain, in the lateral margin of the tongue were observed by reverse transcription polymerase chain reaction and immunohistochemical analyses. The main MHC isoform in the superior longitudinal muscle of the tongue was MHC-2b, with the fastest function and the main MHC isoform in the transverse muscle of the tongue was MHC-2a. These findings suggested that the fastest function is necessary for the superior longitudinal muscle of the tongue, which is useful for moving the tongue in and out of the mouth in the sagittal direction, showing different cellular biological properties of the myofibers from those of the transverse muscle of the tongue.

Temporomandibular joint ankylosis: a case report.

This report is based on a case of temporomandibular joint ankylosis discovered in a cadaver during routine student dissection in the Department of Anatomy at Tokyo Dental College. Extensive osseous ankylosis in the left temporomandibular joint was evident in this case which exhibited a distinctive bird-like facial deformity caused by a mandibular growth disorder. This resulted in the underdevelopment of the mental area in particular. Furthermore, abnormally enlarged antegonal notching was present along the inferior border of the mandible anterior to the angle. Both these manifestations indicated the likelihood that the ankylosis had contributed to the abnormalities and had commenced at an early stage of skeletal development.